Cost Guide

Concrete Cost Guide

Real price ranges for driveways, patios, pool decks, and walkways — by finish, by project size, and by the factors that actually move your estimate. No ballpark guesses.

Preview your project

The short answer

Most residential concrete runs $4–$18 per square foot installed. Plain broom finish sits at the low end; decorative stamped and exposed-aggregate finishes sit at the high end. A typical 2-car driveway lands around $2,400–$9,000, and a standard backyard patio around $1,000–$7,200.

Cost by project type

Per-square-foot range plus a realistic total for a typical job.

ProjectPer sq ftTypical sizeTotal range
Driveway$4–$15~600 sq ft (2-car)$2,400–$9,000Visualize
Backyard Patio$5–$18200–400 sq ft$1,000–$7,200Visualize
Pool Deck$6–$16500–800 sq ft$3,000–$12,800Visualize
Walkway$6–$16100–200 sq ft$600–$3,200Visualize

Cost by finish

The finish is the single biggest driver of price and appearance.

Broom Finish

$6–$10 / sq ft

A clean, slip-resistant surface created by brushing the concrete while it is still wet. The most common and budget-friendly driveway finish.

Pros & cons

Stamped — Modern

$10–$18 / sq ft

Geometric stamped patterns that mimic stone or tile for a clean, contemporary look with real decorative value.

Pros & cons

Stamped — Rustic

$10–$18 / sq ft

Rustic stamped concrete resembling natural flagstone for a warm, textured, organic appearance.

Pros & cons

Exposed Aggregate

$8–$12 / sq ft

Decorative stones are exposed on the surface for a textured, slip-resistant, highly durable finish that hides wear well.

Pros & cons

Smooth / Troweled

$8–$15 / sq ft

A sleek, smooth-troweled finish for a minimalist modern look. Less slip-resistant, so it is best for low-traffic areas.

Pros & cons

Paver Look

$10–$16 / sq ft

Concrete stamped to look like individual interlocking pavers, with the durability and lower maintenance of a single monolithic pour.

Pros & cons

What actually changes your price

Prep & demolition

Removing existing concrete runs $2–$6 per sq ft. Grading, base, and drainage prep add more if the ground is uneven or soft.

Project size

Larger pours cost less per square foot because setup and mobilization are spread across more area. Small jobs may carry a minimum charge.

Finish & color

Broom is the cheapest; stamped and exposed aggregate run $4–$8 more per sq ft. Integral color, stains, and borders add $1–$5 each.

Location & access

Local labor rates, material delivery, and how easy it is to get a truck to the pour all affect the final number.

Concrete pricing — frequently asked

Why do concrete estimates vary so much?

Most of the variation comes from finish choice and site prep. A plain broom driveway and a stamped one can differ by $8–$10 per square foot. Removal of old concrete, grading, and reinforcement add fixed costs that dominate small jobs.

Is stamped concrete worth the extra cost?

For visible patios and entryways, yes — stamped concrete delivers a high-end stone or tile look at roughly half the cost of real stone. For a pure utility driveway, broom or exposed aggregate usually gives better value per dollar.

How much does concrete driveway removal add?

Expect $2–$6 per square foot to demo and haul away an existing driveway. On a 600 sq ft driveway that is roughly $1,200–$3,600 added to the pour cost.

Does a smaller project cost more per square foot?

Often yes. Contractors have a minimum charge for mobilization, forms, and a concrete truck delivery, so a 100 sq ft walkway can cost more per square foot than a 600 sq ft driveway.

See exactly what you'd be paying for

Upload a photo and preview any finish on your own property — free, in under a minute.

Try the visualizer